Microcom 48-466 User Manual
Page 76
Quick Reference Command Summary
Appendix A
48-466 Operators Manual
70
^A
^D
COMMAND
22
Change SW2: Software dip switch #2. Below is the ^AB sequence:
12345678
^ABxxxxxxxx
*******.)))),
******.)))),*
*****.)))),**
*****
Power-up Label Format
*****
000=ALWAYS EPROM Format 1
*****
001=ROM or Saved Format File 1
*****
010=ROM or Saved Format File 2
*****
011=ROM or Saved Format File 3
*****
100=ROM or Saved Format File 4
*****
101=ROM or Saved Format File 5
*****
110=ROM or Saved Format File 6
*****
111=ROM or Saved Format File 7
****.))))Q
1=Use Saved Format File, 0=Rom Format
***.)))))Q
1=Print Button Enable, 0=Disable
**.))))))Q
1=Disable Button Use, 0=Enable
*.)))))))Q
1=>RESTARTED< Response Enable, 0=Disable
.))))))))Q
1=Clear Text Enable, 0
=Disable
23
Change SW3: Software dip switch #3. Below is the ^AB sequence:
12345678
^ABxxxxxxxx
*******.
Detect Black Line On Power-up
******.Q
Always 0
*****.)Q
Always 0
****.))Q
Always 0
***.)))Q
Always 0
**.))))Q
1=Send Response After Print
**
0=No Response After Print
*.)))))Q
Always 0
.))))))Q
1=Disable Extended ASCII, 0
=Enable