6 cgn (character generator number), 1 embedded fonts, 2 downloadable fonts and graphics – Microcom 428T User Manual
Page 74
Designing Labels Using LDS
Chapter 4
4-14
428T Operator’s Manual - 880037-0141
4.6.6
CGN
(Character Generator Number)
TSN, XB, YB, CC, TCI,
CGN
, FO, FJ, CMX, CMY, CS, TSP,,, AN
The CGN parameter is a numeric entry that determines the representation and size of
embedded font and bar codes as well as the memory location of graphic images that have
been selected by the TCI parameter.
4.6.6.1
Embedded Fonts
The printer providess seven resident Helvetica style 203 DPI embedded fonts that are
selected using the CGN when text is selected by the appropriate TCI value.
Embedded Bitmapped Fonts
CGN
VALUE
POINT
SIZE
FONT TYPE
FONT SAMPLE
1
6
Swiss™721 Bold
6pt ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890
2
8
Swiss™721 Normal
8pt ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890
3
10
Swiss™721 Normal
10pt ABCDEFGHIJKLMNOPQRSTUVWXYZ
4
12
Swiss™721 Normal
12pt ABCDEFGHIJKLMNOPQRSTU
5
14
Swiss™721 Normal
14pt ABCDEFGHIJKLMNOPQR
7
12
OCR-A
ABCDEFGHIJKLMNOPQRSTUVWXYZ
8
12
OCR-B
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Table 4-4
CGN—Embedded Fonts
4.6.6.2
Downloadable Fonts and Graphics
When selecting downloadable fonts and graphics using TCI value of “7” or “8”, the CGN
denotes the memory slot (1-255) where the font or graphic has been stored. See Chapters
6 and 7 for additional information regarding downloadable fonts and graphics.
For example: If a graphic had been stored into RAM (volatile) memory slot 1 (see Chapter 5
for additional information), the proper TCI would be “8” and the CGN value would be “1”.
The Model printer also provides a standard downloadable font set containing 19 Helvetica
style fonts. These fonts are stored in the printer’s non-volatile flash memory and are
accessed with a TCI of 7 and the appropriate CGN value. Custom font sets may be loaded
into printers at the factory, ask your Microcom Representative for additional information on
custom font sets.
Downloadable fonts must be stored in two separate directions; 0 and 90 degrees. This
means that the 0 degree fonts should be used with 0 and 180 degree rotations while the 90
degree fonts used with 90 and 270 degree rotations in order to achieve correct printing.