Meinberg TCR LANTIME - Manual (Page 18)

AFNOR-Standard format
Overview
The Board TCR510 was designed for the decoding of unmodulated and modulated
IRIG- and AFNOR-Timecodes. Modulated codes transport the time information by
modulating a sinusoidal carrier signals amplitude whereas unmodulated signals
employ a pulse width modulated DC signal.
The receivers automatic gain control allows the reception of signals within a range
from abt. 600mVpp up to 8Vpp. The potential free input can be jumper selectable
terminated in either 50
Ω, 600 Ω or 5 k Ω. Modulated codes are applied to the board
via an on board SMB connector.
18