Meinberg GPS169PCI User Manual
Meinberg Hardware
Table of contents
Document Outline
- Impressum
- Driver Diskette
- Content of the diskette
- General information
- Block diagram GPS169PCI
- GPS169PCI features
- Time zone and daylight saving
- Asynchronous serial ports
- Time capture inputs
- Pulse and frequency outputs
- DCF77 emulation
- Connectors and LEDs in the rear slot cover
- Installing the radio clock
- Configuring the 9 pin connector
- Mounting the board
- Mounting the antenna
- Powering up the system
- Firmware updates
- Replacing the lithium battery
- CE label
- Timecodes
- The timecode generator
- IRIG standard format
- AFNOR-standard format
- Assignment of CF Segment in IEEE1344 mode
- Generated timecodes
- Selection of timecode
- Technical Specifications GPS169PCI
- Assignment of the 5 pin jumper block
- Technical specifications of antenna
- Assembly with CN-UB/E (CN-UB-280DC)
- Time strings
- Format of the Meinberg Standard time string
- Format of the Meinberg Capture String
- Format of the SAT-time string
- Format of the NMEA 0183 string (RMC)
- Format of the Uni Erlangen string (NTP)
- Format of the ABB SPA time string