Measurement Computing Personal488 rev.3.0 - Manual (Page 36)

Windows 2000
3-26 Installation 04-10-01 Personal488 for Windows 95/98/Me/NT/2000
14. Click Next.
Windows 2000 will install software
for the device.
If Windows could not detect any
hardware settings for the device, a
message box informs you that
hardware settings must be entered
(see the following figure).
15. If Windows could not detect any
hardware settings, as indicated by the
message in step 14, enter the settings.
Refer to Hardware Configuration
Reference (chapter 4) for setting
information.
16. When prompted that “Windows is
ready to install drivers for your new
hardware,” click Next.