Overview, Program requirements, E – national instruments—compatible drivers …… e-1 – Measurement Computing Personal488 rev.3.0 User Manual
Page 149: Overview …… e-1 program requirements …… e-1, Appendix e
Personal488 for Windows 95/98/Me/NT/2000
03/16/01
National Instruments—Compatible Drivers E-1
Appendix
E
Upgrading from a Previous Version …… E-2
Miscellaneous Hints and Tips …… E-2
National Instruments — Driver488/NI/32 2.0
Overview
This package is installed automatically by the Windows 95/98/Me/NT/2000 setup program.
Driver488/NI/32 will allow applications developed for use with National Instruments 32-bit IEEE488
interface driver (GPIB-32.dll) to communicate through the IOtech Personal488 line of interfaces.
32-bit Windows programming languages, including LabView for Windows, are supported.
The following Personal488 interfaces are supported:
IOtech Personal488
IOtech Personal488/AT
IOtech Personal488/ATpnp
IOtech Personal488/CARD
IOtech Personal488/MM
IOtech Personal488/PCI
The hardware I/O settings (port, interrupt, etc...) are stored in the registry. The Control Panel Applet takes
care of all configuration information.
Program Requirements
The following software is required:
•
Microsoft Windows 95/98/Me/NT/2000 Operating Systems
•
Driver488/W95 or /WNT
•
Application written to communicate through Gpib-32.dll.