Measurement Computing WEB-TEMP - Manual (Page 36)

WEB-TEMP User's Guide Specifications
36
Network factory default settings
Table 17. Factory default specifications
Parameter Specification
Factory default IP address 192.168.0.101
Factory default subnet mask 255.255.255.0
Factory default Gateway 192.168.0.1
Factory default DHCP setting Enabled
Factory default user name "webtemp"
Factory default password "mccdaq"
Web server Enabled
Network protocols
Table 18. Factory default specifications
Parameter Specification
Protocols implemented IP, ARP, ICMP, DHCP, UDP, TCP, NBNS, HTTP
Protocols using UDP or TCP for transport communicate on their IETF assigned
ports, for example HTTP on TCP port 80.
UDP messaging protocol UDP port 54211
TCP downloading protocol TCP port 54267
HTTP 1.0 alternate port TCP port 49152-65535 (not including 54267)
Network name "webtemp_xxxxx", where xxxxx is the device serial number
Network name publication Via NBNS (responds to b-node broadcasts, therefore only available on the local
subnet)
Max number of simultaneous HTTP
connections 3
Max number of non-HTTP TCP
sockets 5
Network security
Table 19. Factory default specifications
Parameter Specification
Security implementation IP address based session manager with user-name/password login for
configuration and control transactions (data is not secured.)
Session timeout 5 minutes with no activity
User-name/password encryption Base64
The default web page does not support encryption if Javascript is disabled in the
web browser.
Vulnerabilities Denial of service attacks, user-name/password spoofing, script probing and simple
decryption