Measurement Computing USB-QUAD08 - Manual (Page 7)

7
Chapter 2
Installing the USB-QUAD08
What comes with your USB-QUAD08 shipment?
As you unpack your USB-QUAD08, verify that the following components are included.
Hardware
 USB-QUAD08
 USB cable (2-meter length)
Documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide. This booklet provides
an overview of the MCC DAQ software you received with the device, and includes information about installing
the software. Please read this booklet completely before installing any software or hardware.
Optional components
If you ordered any of the following products with your board, they should be included with your shipment.
 Cables
o C37F-4X9F-1M
o C37FFS-x
o C37FF-x
 Signal termination accessories
MCC provides signal termination products for use with the USB-QUAD08. Refer to Signal termination on
page 14 for a list of compatible accessory products.
 ACC-202 DIN-rail kit
Unpacking the USB-QUAD08
As with any electronic device, take care while handling to avoid damage from static electricity. Before
removing the USB-QUAD08 from its packaging, ground yourself using a wrist strap or by simply touching the
computer chassis or other grounded object to eliminate any stored static charge.
If the device is damaged, notify Measurement Computing Corporation immediately by phone, fax, or e-mail.
 Phone: 508-946-5100 and follow the instructions for reaching Tech Support
 Fax: 508-946-9500 to the attention of Tech Support
 Email:
techsupport@mccdaq .com
For international customers, contact your local distributor. Refer to the International Distributors section on our
web site at
www.mccdaq.com/International .
Installing the software
Install the MCC DAQ software before you install your board. The driver needed to run the USB-QUAD08 is
installed with the MCC DAQ software. Refer to the Quick Start Guide for instructions on installing the software
on the MCC DAQ CD. This booklet is available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-
Quick-Start.pdf .
Be sure you are using the latest system software
Before you install your USB-QUAD08, run Windows Update to update your operating system with the latest
USB drivers.