Measurement Computing USB-QUAD08 - Manual (Page 14)

USB-QUAD08 User's Guide Installing the USB-QUAD08
14
C37FFS-x and C37FF-x pinout
Figure 9. C37FFS-x cable
Figure 10. C37FF-x cable
Signal termination
You can connect the USB-QUAD08 to the following accessory boards using the C37FF-x or C37FFS-x cable.
 SCB-37 — Signal connection box, 37-conductor, shielded.
 CIO-MINI37 — Universal screw terminal board, 37-pin.
 CIO-MINI37/DST — Universal screw terminal board, 37-pin, detachable screw terminals.
 CIO-MINI37-VERT — Universal screw terminal board, 37-pin D male connector, vertical.
 CIO-MINI37-VERTDST — Universal screw terminal board, 37-pin D male connector, vertical, detachable
screw terminals.
 CIO-TERMINAL— Universal screw terminal board, prototyping area 37 terminals.
Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx .
DIN-rail mounting
Use the ACC-202 DIN-rail kit used for mounting a USB-QUAD08 to a standard DIN rail. Use the thread-
forming screws to attach the DIN rail clip to your device.
Figure 11. ACC-202 DIN-rail kit
Details on this product are available on our web site at www.mccdaq.com/daq-accessory/acc-202.aspx .