Measurement Computing UL for NI LabVIEW - Manual (Page 92)

Universal Library Virtual Instruments (VIs) Memory board VIs
MemSetDT.VI
Sets the DT Connect mode of a memory board.
Summary:
Inputs: BoardNum [U32] - The board number assigned when installed with InstaCal. Can
be 0 to 100.
Mode [TF] - Direction of memory board DT transfer.
Output: ErrCode [I32] - Error code. See ErrMsg.VI
Arguments:
BoardNum The board number associated with a board when it was installed with InstaCal.
Mode Must be set to either DTIN (default) or DTOUT . Set the Mode on the memory board to
DTIN to transfer data from an A/D board to the memory board. Set Mode = DTOUT
(True) to transfer data from a memory board to a D/A board.
ErrCode Error code from the Universal Library. Zero if no error occurred. Use the ErrMsg
VI to convert ErrCode into a readable string.
Notes:
This command only controls the direction of data transfer between the memory board and another board that
is connected to it via a DT Connect cable.
Do not use this VI when you are using the EXTMEMORY option with AInScBg.VI or AInScFg.VI, etc., as the
memory board mode is already set through AInScBg.VI or AInScFg.VI EXTMEMORY option.
Use this VI only if the parent board is not supported by the Universal Library.
92