Specifications, English – Denon AVR-887 User Manual
Page 77
ENGLISH
ENGLISH
74
Specifications
¢ Audio section
• Power amplifier
Rated output:
Front (A, B):
100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power:
120 W x 2 ch
(8 Ω/ohms)
170 W x 2 ch
(4 Ω/ohms)
Output terminals:
Front:
A or B
0
6 ~ 16 Ω/ohms
A + B
12 ~ 16 Ω/ohms
Center, Surround, Surround. Back:
0
6 ~ 16 Ω/ohms
• Analog
Input sensitivity / input impedance:
200 mV / 47 kΩ/kohms
Frequency response:
10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)
S/N:
100 dB (IHF-A weighted) (DIRECT mode)
Distortion:
0.008 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output:
1.2 V
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting, with 5 mV input)
Rated output / Maximum output:
150 mV / 7 V
Distortion factor:
0.03 % (1 kHz, 3 V)
¢ Video section
• Standard video terminals
Input / output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• S-Video terminals
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• Color component video terminal
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P
B
/C
B
signal — 0.7 Vp-p, 75 Ω/ohms
P
R
/C
R
signal — 0.7 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 100 MHz — +0, –3 dB
¢ Tuner section
[FM]
[AM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range:
87.5 MHz ~ 107.9 MHz
520 kHz ~ 1710 kHz
Usable Sensitivity:
1.0 µV (11.2 dBf)
18 µV
50 dB Quieting Sensitivity:
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
S/N (IHF-A):
MONO
77 dB (IHF-A weighted)
STEREO
72 dB (IHF-A weighted)
Total Harmonic Distortion (at 1 kHz):
MONO
0.15 %
STEREO
0.3 %
¢ General
Power supply:
AC 120 V, 60 Hz
Power consumption:
5.5 A
1 W Max (Standby)
Maximum external dimensions:
434 (W) x 171 (H) x 417 (D) mm (17-3/32” x 6-47/64” x 16-27/64”)
Mass:
13 kg (28 lbs 11 oz)
¢ Remote control unit (RC-1043)
Batteries:
R6P/AA Type (Two batteries)
External dimensions:
52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)
Mass:
175 g (Approx. 6.2 oz) (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.