Denon AVR-887 User Manual
Page 56
Advanced Setup – Part 1
Advanced Setup – Part 1
53
ENGLISH
ENGLISH
Video Setup
Setting the Component In Assignment
This assigns the component video input terminals for the different
input sources.
Press
D
D H
H
to select “Component In Assign”, then
press
ENTER
.
1
Press
ENTER
.
• It is not possible to make the “Component In Assignment” settings
for the function assigned at “iPod Assignment”.
3
Press
D
D H
H
to select the input source, then press
F
F G
G
to set.
2
1-RCA, 2-RCA, 3-RCA:
Assign the “1-RCA”, “2-RCA” or “3-RCA” input terminal to the
input function.
1
2
Setting the HDMI In Assignment
The HDMI input terminals are assigned for the different input sources.
Select the HDMI audio signal playback method.
Press
D
D H
H
to select “HDMI In Assign”, then press
ENTER
.
2
Press
D
D H
H
to select “Audio”, then press
F
F G
G
to select
where to output the audio signals.
4
Press
D
D H
H
to select the input source, then press
F
F G
G
to set.
3
HDMI1, HDMI2:
Assign the “HDMI1” or “HDMI2” input terminal to the input
function.
Press
D
D H
H
to select “Video Setup”, then press
ENTER
.
1
AMP:
Output the speakers connected to the AVR-887.
TV:
Output the TV connected to the AVR-887.
Press
ENTER
.
6
If no audio signal is included in the input signal:
Press
D
D H
H
to select the input source, then press
F
F G
G
to set.
5
EXT. IN, ANALOG:
If there is no HDMI audio signal, the signal automatically switches to
the input from the set terminal.
• If a monitor is connected with an HDMI cable but the monitor is not
compatible with HDMI audio signal playback, only the video signals
are output to the monitor from the AVR-887.
• Audio signals input from the analog and digital terminals are not
output to the TV.
• With HDMI, the video and audio signals are transferred
simultaneously. When HDMI is assigned to an input source, the
digital audio input assignment switches to HDMI along with the
video input.
When this setting is made for input sources to which a digital audio
input (COAXIAL or OPTICAL) is previously assigned, the digital audio
assignment is set to HDMI.
In this case, reassign the digital input using the procedure described
at “Digital In Assign” (
page 49).
• It is not possible to make the “HDMI In Assignment” settings for
the function assigned at “iPod Assignment”.
1
2
3
4
5
Compatible with HDMI1 and HDMI2.