Denon AVR-887 - Manual (Page 40)

Basic Operation Basic Operation
37
ENGLISH
ENGLISH
Listening to the radio
Check that the remote control unit is set to “AUDIO”.
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
CHANNEL
[FM/AM]
SHIFT
[ON SCREEN]
[TUNER]
TUNING
[MODE]
BAND
[MEMORY]
BAND TUNING
CHANNEL
SHIFT
Use to select “TUNER” or press
[TUNER] .
Auto tuning
Manual tuning
Press [MODE] to set the auto tuning mode.
• The “AUTO” indicator lights.
Press TUNING .
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the “Manual
tuning” operation.
• “AM” or “FM” can be selected directly by pressing [FM/AM].
Use to select “TUNER” or press
[TUNER] .
Press [MODE] to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
Press BAND to select “AM”, “FM” or “XM”.
When listening to the XM Satellite Radio ( page 38, 39).
Press BAND to select “AM”, “FM” or “XM”.
When listening to the XM Satellite Radio ( page 38, 39).
Press TUNING .
The frequency changes continuously when the button is held in.
1
2
3
4
1
2
3
4
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
• “AM” or “FM” can be selected directly by pressing [FM/AM].