Denon AVR-887 - Manual (Page 49)

Page Default settings Items
Page Default settings Items
ENGLISH
46
ENGLISH
Advanced Setup – Part 1 Advanced Setup – Part 1
4. Video Setup
2
Component In
Assignment
53
3 Video Convert ON 54
Audio Delay 5 0 ms 55
On Screen
Display
6
Function/Mode = ON
Master Volume = ON
Mode = Mode 1
55
3. Audio Input Setup
49
Digital In
Assignment
Digital
Inputs
Input
source
CD DVD / VDP TV / DBS VCR-1
1
CDR / TAPE
2
EXT. IN
Subwoofer
Level
SW Level = +15 dB
50
Input Function
Level PHONO CD TUNER
CDR /
TAPE
DVD /
VDP
0 dB 0 dB 0 dB 0 dB 0 dB
4
TV /
DBS
0 dB
5
Function
Rename
51
6 Tuner Presets
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
Auto Preset
Memory
F1 ~ F8
G1 ~ G8
90.1 MHz
90.1 MHz
Preset Skip
Preset
Name
51
All preset channels = ON 52
– 52
50
iPod
Assignment
It is possible to assign the Control Dock for iPod’s (ASD-1R, sold separately)
audio and/or video signals to any input terminals on the AVR-887 and play
them.
iPod Function = OFF 50 3
This assigns the digital input terminals for the different
input sources.
Sets the playback level of the analog signal that was input to the EXT. IN
subwoofer terminal.
Up to 56 FM stations can be preset automatically.
The playback level is corrected individually for the different input sources.
The name of the input function that is displayed can be changed.
Preset channels that are not used often can be skipped.
The preset channels can be given the names you want.
This assigns the component video input terminals for the different input
sources.
This sets whether or not to use the video conversion function.
Adjust the time delay between the video and audio signals.
Set whether or not to display the on screen display for indications other
than the menu screens.
V. AUX
VCR-1 VCR-2 V. AUX
0 dB 0 dB 0 dB
PHONO CD TUNER
CDR /
TAPE
DVD /
VDP
TV /
DBS
VCR-1 VCR-2 V. AUX
53
HDMI In
Assignment
1
The HDMI input terminals are assigned for the different input sources.
Select the HDMI audio signal playback method.
HDMI Out
Setup
4 OFF 54
Set whether or not to up-convert from analog video signals to HDMI.
When this function is used, the format of the signal output from the
HDMI terminal can be set.
DVD / VDP TV / DBS VCR-1 VCR-2 V. AUX
1-RCA 2-RCA 3-RCA NONE NONE
DVD / VDP TV / DBS VCR-1 VCR-2 V. AUX
NONE NONE NONE NONE NONE
VCR-2
COAX 1 OPT 1 OPT 2 COAX 2 OPT 3 OPT 4 OFF