Legrand AU1022 - Manual

INSTRUCTION / INSTALLATION SHEET
lyriQ™ Zone Expander
IS-0422 Rev. O
301 Fulling Mill Road, Suite G
Middletown, PA 17057
Phone (800) 321-2343 / Fax (717) 702-2546
www.onqlegrand.com
©Copyright 2008 by On-Q/Legrand All Rights Reserved. Page 1 of 3
1. INTRODUCTION
The On-Q /Legrand lyriQ™ Zone Expander, P/N AU1022 (see
Figure 1), gives the homeowner the ability to support up to 16
individual audio zones. It is housed in the structured wiring
enclosure, and connected between two lyriQ™ Four Source,
Eight Zone Distribution Modules (P/N AU1002).
The Zone Expander can be used as an integral part of the
lyriQ™ Audio System, which utilizes Category 5 technology to
distribute high quality audio to remote locations via Category 5
cable, creating a versatile whole-house audio system that will fill
your rooms with high quality sound for years to come.
2. DESCRIPTION
To support up to 16 lyriQ™ audio output zones in one lyriQ™ Multi-source system, the 4 audio sources from a
combination of a lyriQ™ Triple Source Input (P/N AU7428 or AU1011-xx for flush-mount) and a lyriQ™ Single
Source Input (P/N AU7398 or AU1004-xx for flush-mount) are fed to the Zone Expander, which in turn feeds
those inputs to two lyriQ™ Four Source, Eight Zone Distribution Modules, effectively giving the homeowner 16
audio output zones (see Figure 2). The IR signal lines are also passed along to the output zones, and the audio
interrupt functionality normally associated with our Intercom system is also supported.
NOTE: The Zone Expander does not require an external power supply, as required power comes from
the attached lyriQ™ Four Source, Eight Zone Distribution Module.
Figure 1
Figure 2