Legrand NV-D2120 - Manual (Page 8)

1 6 7 8 2 3 4
Back Panel Features
1. Audio Source Input: The D2120 will accept any line level stereo audio signal. This can be from the preamp lineout of a multi-source,
multi-zone whole house system such as the NuVo Essentia E6G and Grand Concerto systems, or the audio output of any non-amplified source, such
as an AM/FM tuner, CD player, or Satellite receiver.
2. Sensitivity Gain Control: Left and Right Channel Sensitivity trim pots allow the incoming signal to be increased or decreased to
maximize the potential output of the audio source.
3. Power Mode: This switch dictates how the amplifier responds to external triggers. The D2120 has 3 trigger methods: Incoming audio
signal, external voltage input, or the power button on the front of the amplifier.
4. Unit On: This provides a 12V trigger output when the amplifier is powered on. This can be used to turn on external audio equipment, daisy
chain multiple external amplifiers, or trigger a relay switching power strip.
5. Trigger In: This voltage trigger input allows the D2120 to power up whenever a voltage of 3-30 volts AC or DC is present.
6. Speaker Impedance: This switch sets the impedance stability at either four or eight ohms.
7. Speaker Output: The speaker output attaches to the amplifier via a modular plug and provides 120 Watts per channel output at either 4
or 8 ohms.
8. AC Power: The D2120 is designed to plug into any AC power source.
8
serial number
CO NF OR MS TO UL ST D. 60 06 5 CE RT IF IE D TO CAN /C SA STD .
C2 2. 2 No .6 00 65 :0 6
N1839
RoHS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
303 3118
5