Legrand WP1014-WH - Manual

Legrand Products:
Flat Panel tV connection Kit
(Ht2102-WH-V1)
In-Wall cable access Port
(WP1014-WH-V1)
1-gang, new Work, Low Voltage
(F9059-01-V1 Bracket)
Flat Panel TV Installation
1.
ITems Needed
HT2102-WH-V1
Flat Panel TV
Connection Kit
Mounting a flat-panel tV on the wall
is easy when you can hide the cables.
Below you’ll find an easy-to-follow
guide outlining how to mount a flat-
panel tV on the wall using just two
products from Legrand.
www.legrand.us/onq
WP1014-WH-V1
In-Wall Cable Access
Port
2.
GeTTING sTarTed
First, determine where to draw
power for this product. You can see
in Figure 1 that the incoming cable
wire and power outlet are side by
side, but too far away from ideal
mounting height. If you lack an outlet at ideal
mounting height, consider existing
alternatives. In this example, the
adjacent master bedroom wall has
a power outlet in the same stud bay
that you can tap for current. next, measure where the power
outlet is located to determine
placement for the Brush strap
installation.
Figure 1 Figure 2 Figure 3 Figure 4
aPProxIMate Project
coMPLetIon tIMe:
2 Hours
tooLs & addItIonaL suPPLIes:
• drywall saw • screwdriver
• cable stripper • electric tester
• Level • drill
• tape Measure • electrical Wire
• appropriate Mount for tV