Legrand PS895 Series Floor Box Covers User Manual

Ps862 series floor box applications

PS895/PS896 Series
Floor Box Covers

I N S T A L L A T I O N I N S T R U C T I O N S

Installation Instruction P/N: 340793Rev. B – November 2006

Pass & Seymour

electrical systems conform to and should be properly

grounded in compliance with requirements of the current National
Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or fire
hazard if improperly installed or used. Pass & Seymour electrical
products may bear the mark as UL Listed and/or Classified and should
be installed in conformance with current local and/or the National
Electrical Code.

Products Covered: PS895, PS895T, PS895SP, PS895TSP, PS895GFI, PS895TGFI, PS896CK12, PS896TCK12, PS895TAL, PS895TCAL,

PS895GFICAL, PS895TGFIAL, PS895SPCAL, 895TSPAL, PS896CKAL12, and PS896TCKAL12 Covers

IMPORTANT: Please read all instructions

before beginning.

PS862 SERIES FLOOR BOX APPLICATIONS:

STEP

1 Remove any plaster ears before wiring and attaching

the receptacle.

Cover Attachment:

STEP

Place the gasket support plate over the receptacle and
attach with #6 round head screw.

STEP

3 Place Gasket over the gasket support plate.

STEP

4 Attach cover with (3) #8 flat head screws.

Catalog No.

PS895T (Shown)

Pass & Seymour / Legrand

P.O. Box 4822
Syracuse, NY 13221-4822

1-800-223-4185

P/N340793Rev. B – November 2006 – For latest specs visit www.passandseymour.com

This manual is related to the following products:

PS896 Series Floor Box Covers