Legrand 24DWND - Manual

24DWND 24DWNR
Downward-Facing Device Activations
I N S T A L L A T I O N I N S T R U C T I O N S
Installation Instruction No.: 1 007 174 – October 2007
Wiremold / Legrand electrical systems conform to and should be
properly grounded in compliance with requirements of the current
National Electrical Code or codes administered by local authorities.
All electrical products may present a possible shock or fire
hazard if improperly installed or used. Wiremold / Legrand electrical
products may bear the mark as UL Listed and/or Classified and should
be installed in conformance with current local and/or the National
Electrical Code.
IMPORTANT: Please read all instructions
before beginning.
1. Remove appropriate twistout for application. 2. Place upper edge of bracket under
upper lip of raceway.
3. Attach bracket to the wall using #8 (5/16" [7.9mm] head
size) flat head fastener or equivalent.
4. Feed wire through twistout and snap on
raceway covers.