Legrand 630B Raceway Cutters - Manual

640B 4000
Base Cutter
630B, 630C,
640B and 640C
Raceway Cutters
1a. Use (two) 2x4s laid flat to
hold base parallel to cutter
2. Lower handle to cut
side and 2/3 of the way
through cover 3. Lower other handles to
complete cover cut.
2. Cut through side wall
and across bottom 3. Raise handle and
complete cut. 2. Raise handle to cut
through side wall only.
This will hold cover in place. 3. Raise other handle to
complete cut.
*Shown with handles removed
INSTALLATION
INSTRUCTIONS
The Wiremold Company
In U.S.:
60 Woodlawn Street • West Hartford, CT 06110
(203) 233-6251 • FAX 203-232-2062
40644 893
2 x 4
2 x 4
6. Raise handle to complete
base cut
4. Cut other side edge
2. Shuffle handles to center base
1. Mark base and insert into
desired cutting location
5. Raise handle, cut side
wall and across bottom
3. Cut side edge
640C 4000
Cover Cutter
1. Mark cover and insert
into desired cutting location 1a. Use 2 x 4 on edge to
hold cover parallel to cutter
2 x 4
630C 3000
Cover Cutter
1. Mark cover and insert
into desired cover location 1a. Use two 2x4s, one flat
and one on edge to hold
cover parallel to cutter
2 x 4
2 x 4
630B 3000
Base Cutter
1. Mark base and insert into
desired cutting location 1a. Use 2x4 on edge to
hold base parallel to cutter
2 x 4
™
WIREMOLD
Wire Management Systems
™
WIREMOLD
Wire Management Systems