beautypg.com

Legrand 2700 Series Uniduct Low-Voltage Latching Raceway 2A Multimedia Surface Mount Boxes User Manual

2a multimedia surface mount boxes, Recommended cable routing, Overview

background image

OVERVIEW

2A Multimedia Surface Mount Boxes can be
mounted utilizing a wide variety of methods.
The two larger models mount on standard
single and double-gang NEMA or European
type service boxes. All models can be affixed
to solid surfaces such as drywall or wooden
baseboards, or modular furniture partitions.
The three sizes also feature easy to remove
knock-outs that make them fully compatible
with Wiremold surface raceways. The two
larger models feature integral fiber storage
loops that maintain bend radius requirements
and provide one meter of fiber storage. All
Multimedia boxes feature a front loading
snap-in design and utilize 2A size
Communication modules.

PART NUMBER

DESCRIPTION

CM-MMB-231

1 Insert Box (400/800 Raceway KO’s)

CM-MMB-291

1 Insert Box (2700/2800 Raceway KO’s)

CM-MMB-571

1 Insert Box (500/700 Raceway KO’s)

CM-MMB-232

2 Insert Box (400/800/2300/2300D Raceway KO’s)

CM-MMB-292

2 Insert Box (2700/2800/2900 Raceway KO’s)

CM-MMB-233

3 Insert Box (400/800/2300/2300D Raceway KO’s)

CM-MMB-293

3 Insert Box (2700/2800/2900 Raceway KO’s)

©

Copyright 2005 Wiremold / Legrand All Rights Reserved

Wiremold / Legrand
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251
Canada:
570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX 905-738-9721

41991R1 – Updated July 2005 – For latest specs visit www.wiremold.com

2A Multimedia
Surface Mount Boxes

I N S T A L L A T I O N I N S T R U C T I O N S

Installation Instruction No.: 41991R1 – Updated July 2005

Instruction sheets are intended as an aid only in the installation
of described products. The Wiremold Company does not
assume any liability due to the physical misuse or inappropriate
application of the products described herein.

RACEWAY APPLICATIONS

Recommended Cable Routing

WALL APPLICATIONS

STANDARD MOUNTING HOLE DESIGNATION

NEMA SINGLE GANG

NEMA DOUBLE GANG

CABLE TIE ACCESS

EUROPEAN

(All attachment other than listed four screws recommended)

j

Wiremold Electrical Systems conform to and should be
installed and properly grounded in compliance with
requirements of the current National Electrical Code,
Canadian Electrical Code, or codes administered by
local authorities.

All electrical products may represent possible shock or
fire hazard if improperly installed or used. Wiremold
electrical products are UL listed, made for interior use
only, and should be installed in conformance with
current local and/or the National Electrical Code.