Legrand Access 5000 Large Capacity Raceway Device Plate - Manual

5007C-2 Deep Device Plate
Installation Instructions
Deep devices such as Ground Fault Circuit Interrupters, Surge Suppressor Outlets and/or the Communications
Activation Series inserts, may be utilized in the Wiremold Access
™ 5000 Raceway System using this Deep Device
Plate. A typical installation is illustrated in Figure 1.
Twist off the two Spacers attached to the 5007C Device Bracket (see Figure 3). Snap the Device Mounting
Bracket, 5007C into the base channel provided as in Figure 2. Assemble the device to the Device Bracket utilizing
the Spacers as shown in Figure 1. Assemble the Deep Device Plate to the Raceway Base. Engage the hooks
located next to the double window opening, to the lower (large) lip of the Raceway Base. Rotate the Device Plate
toward the wall snapping it into place (see Figure 4). Assemble the desired Face Plate as shown in Figure 1.
Trim Cover 5000T
Raceway
Base
5000B
Device Bracket
w/Spacers 5007C
Raceway Cover 5000C
Deep Device
Plate 5007C-2
5507 Series
Face Plates
St’d Blank
Insert CASBLNK
CAS Series
Inserts
Figure 1
5007C-2