Legrand AUDM - Manual (Page 6)

6
SpeAKer operAtIoN:
Turn on your speaker system Turn ON/OFF Switch on both speakers to “ON” –
Indicator light will glow.
Turn up speaker volume Press the “+” button.
Turn down speaker volume Press the “-” button.
Connect a BLUeTOOTH ® device to
the speakers
Prepare your BLUeTOOTH enabled product to
search for available devices. Press the “+” and
the “-” button on the Control Speaker together
and hold for five seconds, until the indicator
light on the Control speaker begins to flash. Use
your Phone or MP3 player to search for available
devices. Speaker is listed as “adorne Modular
Music”. Select to pair and connect. You are now
ready to send music wirelessly to your speakers.
Note: Some BLUetooth devices
require a password to accept.
When the 3.5 audio cable is
used, BLUetooth access is
disabled.
Charge your device via USB
connection The Control Speaker can charge your device using
the USB connection. Place onto cradle. Make sure
connector plugs into base of device. If you have an
Apple
® device, use the provided USB/Apple ® cable.
If you have a micro USB type device you will need
to provide your own cable. View “Configuring the
Speaker” section on how to install cables.
The USB charger supplies 5V at 1.5 Amps.
Listen to music with 3.5mm
audio cable If you do not have a wireless device, you can
connect to the speaker using the included 3.5mm
audio cable.