Legrand E86760 Type A - Manual

E86760 Type A
E86760WHTDJ
Type ADJ
E86762 Type C
Modular Tele-Power ® Pole
INSTALLATION INSTRUCTIONS
Consisting of:
Type A Pole: (14' 5")
Entrance end fitting; 125V, 15 Amp, duplex conve-
nience receptacle; Switched sign power; Twin duplex,
125V, 15 Amp IG circuit; Factory installed telephone
and data cabling; Two (2) connectorized power whips;
Mounting hardware.
Type ADJ Pole (not shown): (14' 5")
Entrance end fitting; 125V, 15 Amp, duplex conve-
nience receptacle; Switched sign power; Twin duplex,
125V, 15 Amp IG circuit; Factory installed; Category 5
cabling and 4 Cat 5 jacks; Two (2) connectorized
power whips; Mounting hardware.
Type C Pole: (10' 6")
Entrance end fitting; Switched 125V, 15 Amp sign
power; Switched
125V, 15 Amp
power out; 125V,
15 Amp duplex
convenience recep-
tacle; Mounting
hardware.
Telephone Cables — No. of Pairs 25 4
No. of Cables
30% Fill 3 20
Max. Fill 7 40
(No Scale)
Wiremold electrical systems
conform to and must be
installed in accordance with
National Electrical Code
and local codes where
applicable.
Proper grounding tech-
niques are required.
Make sure power is
OFF before installing
these poles.
The Wiremold Company
Custom Products Division
60 Woodlawn Street
West Hartford, CT 06110
40389 297 © 1997 The Wiremold Company
To power Type C pole, plug in
modular whip from pole into whip
connector on front of Type A pole.
5
COMMUNICATIONS
POWER
2 1/4"
2 5/16"
1 1/4"
1"
Type A Type C