Legrand RC7AM2TCBK User Manual
Page 2
Disposable Plate
(removed)
Mounting Screws
Carpet/Tile
Flange
Threaded
Reducing Ring
Step 5 Cover Assembly: Catalog No. RC9CM2TC. Remove
disposable plate and replace with carpet/tile flange.
Install with 4 #6-32 x 3/8" [9.5mm] PHMS.
CAUTION: Poke-Thru device cannot be rotated in hole
after insertion into floor.
Step 6 Complete Assembly:
Catalog No. RC9AM2TC.
Insert assembly into hole.
Step 7 With the assembly installed, attach a 2" or 1 1/4"
trade size conduit fitting. If a 1 1/4" trade size
connector is used, insert the reducing ring supplied
before inserting the connector.
Step 8 Attach conduit, pull wires and the installation
is complete.
Push Down
NOTE: If Poke-Thru Device is utilized for communication
type cable, where local codes permit, conduit may
be omitted. A steel conduit fitting or a nipple that
extends a minimum distance of 1" [25mm] beyond
surface of carpet/tile flange must be utilized. Protect
wires from damage by installing a bushing suitable
for use with the type of fitting used.