Legrand CCBB Series Floor Boxes User Manual

Page 4

13. Place cover assembly, part #CCBBSCTCAL on top the floor box. Use

1/4-20 x 1" long bolts to secure to floor box enclosure.

6-GANG MOUNTING BRACKETS USED WITH SECTIONAL DEVICE PLATES

Cat. No. RFB119-SPACER

Used to close gap between standard

single and multi-gang plates

(6) 1-Gang Sectional Plates

1 13/16" x 4 1/2"

[46mm x 114mm]

Existing opening when not covered

with Cat. No. RFB119-SPACER

Cat. No. RFB119-SPACER

12. Determine blanking plates and spacers based on typical layouts illustrated below.

6-GANG MOUNTING BRACKETS USED WITH STANDARD DEVICE PLATES

3-Gang Standard Plate

6 3/8" x 4 1/2"

[162mm x 114mm]

1-Gang Standard Plate

2 3/4" x 4 1/2"

[70mm x 114mm]

Cat. No. RFB119-SB

Single-gang Sectional Blank Plate

(mounted off-center)

Cat. No. RFB119-SPACER
Used to close gap between

standard single and multi-

gang plates

2-Gang Standard Plate

4 9/16" x 4 1/2"

[116mm x 114mm]

Cat. No. RFB119-SPACER

3-Gang Standard Plate

6 3/8" x 4 1/2"

[162mm x 114mm]

Wiremold

U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251
Canada:
570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX 905-738-9721

1 009 489R2 0512