Legrand 291-H/BTC - Manual (Page 3)

Step 3. Install outlets, communication devices Step 4. Attach cover plate using
and corresponding faceplates. the #8-32 screws provided.
NOTE: If communication is required, connect necessary wires
to communication jacks and snap into opening provided
in faceplate.
Completing Installation of RC9AFFTC and RC9CFFTC:
Step 1. Insert poke-thru stem into hole. Orientation of 1/2" trade size
conduit should be directed towards power termination point.
CAUTION: Poke-thru stem cannot be rotated after insertion.
3
If Stem and Service
Head Ordered
Separately, Install Stem
Push Down
Push Down