IHSE USA 234 Series VTO2/VRO2 KVM-Extender - Manual (Page 43)

APPENDIX E: SPECIFICATIONS
43
Appendix E: Specifications
Power Requirements
Voltage PSU: 90..240VAC-0.5A-47..63Hz/6VDC-2000 mA
Power required Local Unit: approx. 8W
Remote Unit without keyboard: approx. 8W
Remote Unit with keyboard: approx. 9.5W
Interface
(Depending on type of device)
Video Source/Monitor VGA up to 1280x1024@75Hz
Keyboard PS2
Mouse PS2 2-/3-button and wheel mice
Speed Up to 19200BAUD
Data format Format Independent, transparent
Serial
Handshake RTS, CTS, DTR, DSR are sent across link
Description Bi-directional stereo audio link
Transmission
Method Digitised virtually CD quality audio (16-bit, 38.4KHz)
Signal Levels Line-Level (5 Volts Pk-Pk maximum) @ 47kOhm
Connectors Local Unit: 2 x 3.5mm stereo jack socket (Line In &
Line Out)
2 x 3.5mm stereo jack socket (Line/Mic In& Line Out)
Audio
Microphone
Support A microphone may be connected to the Remote Unit.
Pull-up resistor provides bias for condenser
microphone.
Option to set microphone amplification to +17dB.
Maximum Length of Interconnection Cable
50µm Multimode 3250ft (1000m)
62.5µm Multimode 3250ft (1000m)