IHSE USA 234 Series VTO2/VRO2 KVM-Extender - Manual (Page 25)

ADJUSTMENTS
25
4. Adjustments
For most applications, you shouldn't need not to make any adjustments to set up your
VTO2/VRO2 V6.00 KVM-Extender.
For some applications, you may need to open the Local Unit and/or the Remote Unit.
Unscrew the Philips-type screws at both sides of the device. Unscrew the UNC type screws at
both sides of the monitor connectors. Carefully displace the lower and upper shells of the
case.
Model K234-9W carries a Serial/Audio daughter board
connected through a flat cable to the main board. Please
remove the upper shell carefully to avoid damaging the flat
cable.
Philips type
screws
Philips type
screws
Philips type
screws
Philips type
screws
UNC type screws at the monitor connectors
UNC type screws at the monitor connectors