IHSE USA 234 Series VTO2/VRO2 KVM-Extender - Manual (Page 38)

VTO2/VRO2 V.6.00 –5 STRAND KVM-EXTENDER
38
Appendix B: 19” Rack Mount Options
The VTO2/VRO2 V6.00 KVM- Extender units can be mounted in a 19” rack using the DDXi
mounting kit.
This contains the following parts:
19” Rack Mounting Kit
To mount a unit:
1. Align the holes on the base plate with the vacant screw holes on the base of the
VTO2/VRO2 V6.00 KVM extender unit.
2. Fasten the base of the unit to the plate of the mounting kit using the supplied screws.
Only use the supplied short screws; longer screws may
cause damage to the PCBs.
3. Close the remaining gaps with blanking plates.
Two small blanking plates
Narrow strip
Wide blanking plate
Base plate
M3x5 Screws (14)