Hoefer SE300 miniVE - Manual (Page 13)

•
p5

To open the module, swing the clamps outward.

Lay the module flat on a work surface.
Preparing self-cast gels
One single gel can be cast on the module. To
cast several gels, use a 4-gel caster such as the
Hoefer SE235 caster (see Ordering information
on page 27).
Assemble the gel sandwich

Prepare the module, as described on page 4.

Choose one notched plate, one rectangular glass
plate, and two spacers. Use only unchipped plates to
prevent leaking.

Assemble the gel sandwich with the notch at the top
of the sandwich and the spacer ridges align along the
glass plate edges on the sides of the sandwich (Fig 4).
Fig 4. Gel sandwich assembly.
Fig 3. Module in the open position.
clamp (2)