beautypg.com

Harken 7413.15 MKIV Hydraulic Jib Reefing & Furling User Manual

Page 25

background image

MKIV Hydraulic Unit 3

25

Slide halyard swivel above feeder. Place

feeder in foil recess. Push screw down

so tab catches under foil. Tighten screw.
Note: Screw will turn with some difficulty.

It is plastic coated to prevent loosening

due to vibration.
Important! When removing screw,

loosen no more than one full turn.

Slide screw up and remove feeder.

Assembly Feeder/Final

Check foil height at top, set and secure

using hex wrench.