beautypg.com

Harken C8436 MKIV Jib Reefing & Furling User Manual

Page 8

background image

Place halves of plastic bushings on stay so

hooked part of longer section faces out.
Tip: With foil screw holes up as shown

below, place longer half of isolator

with hook on upper half.

Install trim cap. Place each side over wire.

Push trim cap into foil to start then tap in

using hammer.

Push trim cap into foil to start then tap

in using hammer.
Install trim cap screws.

Assembly

Top Foil

8

Nautor MKIV Furling

4/18/07

This manual is related to the following products: