Harken C8436 MKIV Jib Reefing & Furling - Manual (Page 7)

Lay top foil in line with others. Slide stay
into top foil and down the line of foils or
slide each foil up stay.
Cut out template at right. Line template up
with top of foil and scribed line. Tape in
place. Use a center-punch to mark holes.
Check center-punch marks to confirm
they are 3/8" (10mm) and 1 3 /
8
" (35mm)
from top of foil.
Drill two 5/32" (4mm) holes for
trim cap.
Foil To
p
!
1 3 /
8
" (35mm)
3 / 8 " (10mm)
Assembly Top Foil
4/18/07 Nautor MKIV Furling 7