Guralp Systems CMG-DM24S12AMS - Manual (Page 49)

CMG-DM24S12AMS Operator's guide
3.6 GPS
All Güralp digitisers have a separate stream for reporting information
about the system, such as their GPS and time synchronization status.
This status information is in plain ASCII text format.
To see a Status window for any digitiser, right-click on the Stream ID
xxxx00, (where xxxx is the ID of the digitiser). In the example below
this is 102600. This is the only stream with a reported rate of 0
samples/s.
During boot-up each unit reports its model type, firmware revision
number, the system ID and serial number. This information is followed
by the number of resets that have occurred and the time of the latest
reboot from its internal clock. The following lines report the current
configuration of the unit's sample rates, output taps, and baud rates. A
typical digitiser re-boot status message looks like this:
March 2004 49