Guralp Systems CMG-DM24S12AMS - Manual (Page 32)

CMG-DM24S12AMS Operator's guide
3.2 Controlling digitisers
To control a digitiser whilst it is running, either right-click on the
digitiser's entry in the list to the left of Scream!'s main window (not the
Local or Comxx icons) and click Control..., or simply double-click the
entry. Scream! will then contact the digitiser and retrieve its current
status, a process which will take a few seconds, after which the Control
window will be displayed. Once you are happy with any changes you
have made in the Control window, click Apply to send them to the
digitiser, where they will take effect immediately.
This chapter describes the control options available to you for the
DM24S12AMS's built-in digitisers. Many of these options will also be
available for other Güralp digitisers or digital sensors connected to the
unit's DIGITAL A – F ports. For the most accurate information, you
should consult the Operator's Guide for the digitiser or sensor you
connect.
System
When the Control window is first opened, it will be showing the System
pane.
32 Issue B