Guntermann & Drunck CATCenter X systems Communicaton modules - Manual (Page 7)

Guntermann & Drunck GmbH CATCenter Communication Components
Page 7
The left column of this submenu displays the consoles for which the
PUSH/GET function is available.
In this window, you can use "Set all consoles" to set all entries to one of the
following values:
• Yes (Push/Get rights assigned to the console) or
• No (Push/Get rights to the console withdrawn)
Use the TAB key to access this pre-select field. Use the Space bar (toggle) to
change the values within the "Set all consoles" field.
You can also assign Push/Get rights to the user selectively for each console
displayed in this list. To do so, select the desired entry and then change it to
either "Yes" or "No".
Use the ESC key to exit the Push/Get rights submenu. If you have made any
changes up to this point but wish to exit the Push/Get rights submenu without
saving your changes, a notification message to that effect will be displayed.
To save the changes you have made, press the F2 key and return to the EDIT
USER submenu.
Default setting: No
2.3.2 Assigning PUSH/GET Rights to User Groups
To assign Push/Get rights to a user group, proceed as follows:
1. Open AdonIS using the hotkey combination CTRL + NUM (default).
2. Press the F11 key; the Configuration menu opens.
3. Move to the entry User Group with the mouse or the cursor keys on
your keyboard and press ENTER .
4. In the open USER GROUP CONFIG submenu, use the mouse or the
cursor keys on your keyboard to move to a user group to which you
want to assign PUSH/GET rights.
5. Then press the F5 or the ENTER key; the Edit User Group submenu
opens: