Guntermann & Drunck CATCenter X systems Communicaton modules - Manual (Page 30)

Guntermann & Drunck GmbH CATCenter Communication Components
Page 30
3.5.2.3 Adding a Target to a Workstation
A target can only be connected to the CATCenter system with its keyboard and
mouse interfaces using a CAT
PRO 2. The VGA interface of the target is
connected directly to a projection device. Therefore, you can connect to the
target via the SELECT menu but you do not see a video signal.
This type of setup could be used, for example, in a control room where a
computer is connected to the CATCenter with its keyboard and mouse
interfaces but the video signals are transmitted from the computer directly to a
projection device.
You can use the tradeswitch function to integrate this target into your TS
workstation.
To add a target to a TS workstation you have created, first use the cursor keys
on your keyboard to select the position in the Tradeswitch Function Edit
submenu where you wish to insert the target. A black bar within the list box
identifies the row, which is currently selected. Subsequently, press the
F10
key in the Tradeswitch Function Edit submenu.
The following window is opened:
T a r g e t S e l e c t
S o r t
A l p h + o n S h o w : A L L
C P U s e a r c h … … … … … … … … …
CPU-ID 00000209
CPU-ID 000a2817
CPU-ID 000fa659
ESC Enter
The elements in the header of this submenu have the following meaning:
TAB / Change Sort Criteria (Sort Mode ► A l p h + ◄ )
Press TAB in the Target Select submenu to move to the sort field. Change
the sort criteria by pressing SPACE bar (toggle).