Guntermann & Drunck CATCenter X systems Communicaton modules - Manual (Page 4)

Guntermann & Drunck GmbH CATCenter Communication Components
Page 4
To activate new functions, you must first open AdonIS for the CATCenter
system using the hotkey combination
CTRL + NUM (default).
Then press the F11 key to open the Configuration menu.
Within this menu, use the arrow keys to access the menu item System. In the
menu System Config step with the arrow keys to the menu item Features.
Pressing the
ENTER key opens the following window:
F e a t u r e M a n a g e m e n t
S y s t e m I D : 0 0 0 0 1 0 6 9
E n t e r n e w k e y :
PUSHGET 101a36605fb3
ESC
TAB
If you have purchased one of these 3 functions then a 12-digit activation code
was provided to you with the function. To enter the activation code, use the
TAB key to move to the "Enter new key" line and enter the code there. Once
the activation code has been entered correctly, the function you have
purchased is activated in the system and a corresponding entry appears in the
list box of the Feature Management submenu.
Note:
An activation code has to be entered for every CATCenter master within a
cluster system.