Guntermann & Drunck CATCenter X systems Communicaton modules User Manual

Page 10

Guntermann & Drunck GmbH CATCenter Communication Components

Page 10

•

If you should attempt to assign your screen contents to a user on his
or her console but this user does not have access rights ("No"), then
the following message is displayed:

C o n f i r m

User Mueller
has no right to access target
CPU-ID 0000029

Do you want to temp. override?

E S C : C a n c e l
E n t e r : O K

You can choose to grant the user temporary full access rights to the
target by pressing

ENTER

, or to cancel the "PUSH" process by pressing

ESC.

Console logged off:

If the target console to which you want to assign the screen contents is logged
off, you can still carry out the push process.
In this case, a virtual user is created for the push process. In this instance, the
virtual user receives the user rights of the source console user. However,
active access to the OSD is not possible within the PUSH process on the target
console. To receive this access, the virtual user has to terminate the PUSH
process. To terminate the push process, the target console user has to press

CTRL

NUM

. The following message is displayed on the screen:

C o n f i r m

This user has been temporar-
ily created by the Push-
function.

AdonIS cannot be operated.
Do you want to logout?

ESC: Cancel
Enter: OK

If you press the

ENTER

key, the virtual user exits the PUSH function and the