Guntermann & Drunck CATCenter X systems Communicaton modules - Manual (Page 19)

Guntermann & Drunck GmbH CATCenter Communication Components
Page 19
2.4.2.3 Terminating GET Mode
If you wish to deactivate this mode, you first have to open the SELECT menu
on the local console by pressing the key combination
CTRL + NUM (default).
To deactivate GET mode, simply select another target here.
After you select another target using the cursor, the MULTIUSER mode label
disappears from the screen immediately and the screen contents of the
selected target are displayed on your local console.
2.4.2.4 Access without Get Rights
If you try to use the GET function without get rights or if the get function is not
enabled on your console, you will receive the following warning message:
S e l e c t m e n u
S o r t A l p h + o n S h o w A l l
C P U s e a r c h : . . . . . . . . . . . . . .
WIN2000
1 WIN NT
Linux
SUN SPARC 5
Linux Server
3 CPU-ID 12345678
2 BSD
WIN2000
WIN NT
↑
↓
Push/Get: no console rights
F11: Config F12: Info
The SELECT menu is displayed once again after pressing any key.
Please ensure if you have get rights as a user. In case of doubt, please
contact your system administrator.
Default: Get function is denied for all users except for the ADMINISTRATOR.