Guntermann & Drunck CATCenter X systems Communicaton modules - Manual (Page 29)

Guntermann & Drunck GmbH CATCenter Communication Components
Page 29
3.5.2.1 Adding a Console to a TS Workstation
To add a console to a TS workstation you have created, first use the cursor
keys on your keyboard to select the position in the Tradeswitch Function Edit
submenu where you wish to insert the console. A black bar within the list box
identifies the row, which is currently selected. Subsequently, press the
F9 key
in the Tradeswitch Function Edit submenu.
The following window is opened:
C o n s o l e S e l e c t
CON 00001047 Standard
CON 00001003 Standard
CON 00120330 Standard
ESC Enter
Now select a console you wish to add from this list.
You own console is identified by a red triangle in front of the console name.
To add a console to the workstation, press ENTER . Subsequently, you are
returned to the Tradeswitch Function Edit submenu.
Press
ESC to exit the menu without saving the changes you have made.
After you select a console, it is entered in the Tradeswitch Function Edit
submenu in the row you selected.
3.5.2.2 Removing a Console or Target from a Workstation
To remove a console or target from a TS workstation you have created, first
use the cursor keys on your keyboard to select the corresponding entry you
wish to delete. Subsequently, press the
F4 key in the Tradeswitch Function
Edit submenu.
The entry in the selected row is gdeleted.