Guntermann & Drunck CATCenter X systems Communicaton modules - Manual (Page 18)

Guntermann & Drunck GmbH CATCenter Communication Components
Page 18
CON 00001047 not connected
Console you can pull screen
contents from (the name
can be edited, see
Chapter
5.6.1 of the CCX
Operation Guide
)
The console is not connected to a target
CON 00007477 no target right
Console you can pull screen
contents from (the name
can be edited, see
Chapter
5.6.1 of the CCX
Operation Guide
)
The console does not possess rights to
access the target.
In this function, you have the ability to pull screen contents from another
console (source console) to your own screen, either for further processing or to
view the contents.
You can also pull screen contents from a projection device (video console)
connected to a console to your own console.
Use the keyboard or the mouse to place the cursor onto the source console
from which you want to pull the screen contents onto the screen of your own
console. Confirm your selection with
ENTER (or click the left mouse button).
The screen contents of the source console now appear on your own console.
In addition, Multiuser mode has been temporarily activated and is shown on
the display of your own console and the source console.
CON 00001492 (Console name, editable)
CPU-ID 00000209 (Target name, editable)
MULTIUSER Note regarding shared access
2.4.2.2 Getting New Screen Contents
During an active get function, you also have the ability to get the screen
contents of another target to your own console.
To do so, repeat the steps described in
Chapter 2.4.2.1.
59