Grandstream GXV3140 User Manual User Manual
Page 54
FIRMWARE VERSION 1.0.7.80 GXV3140 USER MANUAL
Page 54 of 151
NOTE: In some cases where the user wishes to dial strings such as *123 to
activate voice mail or other applications provided by their service provider,
the * should be predefined inside the dial plan feature. An example dial plan
will be: { *x+ } which allows the user to dial * followed by any length of
numbers.
Early Dial
The default setting is NO. Use only if the proxy supports 484 response.
Refer to Use Target
Contact
The default is NO
. If set to YES, then for Attended Transfer, the “Refer-To”
header uses
the transferred target’s contact header information.
Auto Answer
The default setting is NO. If it is set to YES, the GXV3140
will play a “beep”
sound and answer the phone automatically on the speaker.
Send Anonymous
If set to YES,
the “From” header in the outgoing SIP messages will be set to
anonymous to block the caller ID from displaying. The default setting is NO.
Anonymous Call Rejection
The default setting is NO; If set to YES，any anonymous call will be rejected
(with 486Busy message).
Special Feature
Different soft switch vendors have special requirements; therefore users
may need to select special features to meet these requirements. Users can
choose from Standard, CBCOM, RNK, China Mobile, ZTE IMS and Mobotix
depending on their need.
The default setting is Standard.
Enable Call Features
The default is set to YES. If it is set to NO, call features are disabled.
Call Forward Unconditional
Sets the number to forward to unconditionally.
Call Forward When Busy
Sets the number to forward to when busy.
Call Forward When No
Answer
Sets the number to forward to when no answer.
Delayed Call Forward Wait
Time (s)
The wait time before transferring the call to another extension or to
voicemail; the default setting is 20 seconds.
No Key Entry Timeout (s)
Defines the time out duration on no key entry.
Default setting is 4 seconds.
Ring Timeout (s)
Defines the time out duration on no answer.
Default setting is 60 second.
Transfer
on
Conference
Hangup
Defines whether or not the call is transferred to the other party if the initiator
of the conference hangs up.
Default setting is set to No.
Use # as Dial Key
Selects whether or not # is used as Send.
Account Ringtone
This allows the user to configure the general ringtone used for this account.
Users can choose from different ringtones from the dropdown menu. They