Grandstream GXV3140 User Manual - Manual (Page 17)

FIRMWARE VERSION 1.0.7.80 GXV3140 USER MANUAL Page 17 of 151
CONNECTING THE GXV3140 IP MULTIMEDIA PHONE
Figure 5: Connecting the GXV3140
MAKING THE FIRST CALL WITH IPVIDEOTALK SERVICE
The GXV3140 offers users the ability to send and receive free lifetime video calling to other GXV3140’s on
the IPVideoTalk network. Once the GXV3140 is connected, video calls are made using Grandstream’s
configuration peer-to-peer SIP technology and IPVideoTalk service. To place the first video calling,
complete these three (3) simple steps:
1) Connect the handset to the phone using the handset cable provided. Connect the NETWORK
cable and the power cable to the GXV3140 using the methods described above. Wait for the
phone to boot up. After the phone boots up and obtains an IP address through DHCP, it will
attempt to register to the IPVideoTalk network. When the user boots the phone for the first time,
Account 1 will be registered to the IPVideoTalk server with a provisioned extension of 810xxxx.
2) If the registration is successful, the IPVideoTalk text on the LCD will turn green and an assigned
IPVideoTalk number (8xxxxxx) specific to this phone will be displayed. At this point, the phone is
ready for making and receiving video calls over the IPVideoTalk network.
3) Take the phone off hook, and dial the number of the any other phone registered to the IPVideoTalk
network. If the user has purchased two or more GXV3140 IP Multimedia phones, these phones