beautypg.com

Grandstream GXV3140 User Manual User Manual

Page 40

background image


FIRMWARE VERSION 1.0.7.80 GXV3140 USER MANUAL

Page 40 of 151

setting is Yes.

Video frame rate

The Default value is 15 frames/second. The video frame rate is adjustable

based on network conditions.

Increasing the frame rate will increase the amount of transferred data

significantly therefore consuming more bandwidth. Lack of bandwidth will

impair the video due to packet loss.

Video bit rate

The Default value is 128 kbps. The video bit rate is adjustable based on

network conditions.

Increasing the video bit rate may improve video quality if the bandwidth

permits.

Otherwise the video quality will be impaired due to packet loss.

Video Packet Size

The Default value is 1400, range from 100 to 1400.

It is recommended to use 600~800 if you have an Outbound Proxy or

Media Gateway.

Video Rate Control

Frame, TMN8 or GOP. The Default setting is Frame.

TMN8 is good for bandwidths larger than 384kbps.

Video Frame Skipping

Skips bad video frames as they are received.

The Default setting is No.

I-Frame Reference Only

When enabled, all P frames will only have reference to previous I frames.

This method may improve video quality when the network has heavy packet

loss. It will have modest increase in bandwidth usage. The Default setting is

No.

Packetization-Mode

The packetization mode (0 or 1) for the H.264 video packets. The default

setting is 0.

Redundant P-frame

This setting allows the phone to send redundant P-frames of I frames.

When an I frame is delayed or has packet loss, the redundant P-frames will

be used instead. It may make video phone call less prone to errors and thus

make the video stream more robust towards error propagation, but may

increase bandwidth usage. The default setting is set to No.

Adaptive MB Intra Refresh

This parameter specifies whether Adaptive MB Intra Refresh is used or not.

It may protect most important MBs (macro blocks) subjected to packet loss

and to avoid error propagation. The intra-refresh rate is adapted according

to the video packet loss rate. It may increase bandwidth usage. The default

setting is set to No.

Video Packet Loss Rate

Specifies the phone video packet loss rate for the Adaptive MB Intra

Refresh. Users can choose from: Less than 5%, Less than 10%, Less than

15%, Less than 20%, Less than 25%. The default setting is set to Less than