Grandstream GXV3140 User Manual - Manual (Page 31)

FIRMWARE VERSION 1.0.7.80 GXV3140 USER MANUAL Page 31 of 151
3. Multiple Calls: To place the current call on hold, press the LINE button ( ) to select another
line or accept another call. When the line is busy, the user hears a call waiting tone notifying the user
that a call is waiting. Users may toggle between the multiple calls by pressing the Line button and
selecting the line they wish to answer.
CALL TRANSFER
1. Blind Transfer: Press the “CALL TRANSFER” button ( ) to place the other party on hold. The
phone will display the following message: “Dial Number (Blind) OR Select Line (Attended)”. (See
Figure 19). Dial the extension number and press F3 for “SEND”. This will transfer the call to the other
party immediately.
2. Attended Transfer: Press the “LINE” button ( ) to select an idle line to use for attended
transfer; this will place the other party on hold immediately. Dial the number that you wish to transfer to
and after confirmation from the party, press the “CALL TRANSFER” button. The phone will display the
following message: “Dial Number (Blind) OR Select Line (Attended)”. (See figure 19). Press the “LINE”
button and select the line on hold.
Figure 19: Call Transfer Screen
NOTE:

To transfer calls across SIP domains, SIP service providers must support transfer across SIP
domains.