Grandstream GXV3140 User Manual - Manual (Page 139)

FIRMWARE VERSION 1.0.7.80 GXV3140 USER MANUAL Page 139 of 151
Note: When a new password is configured for the first time, there is no need to enter the
corresponding old password. Enter the new password and the confirm password (the two must
be identical). Press F3 to Save the settings. After the password has been changed to the new
password, users will see a prompt at the bottom of the page to indicate that the password change
was successful. (See figure 147).
Figure 147: Configure Password for Profile
After the password has been changed, the user will be prompted for the old password if they wish to
change the password next time.
Note 1: If the password is forgotten, users can factory reset the phone and restore it to
factory defaults. However, all the user data will be lost in this case.
Note 2: If the administrative password has been changed, the phone will prompt for the
password each time users try to access the phone after idle mode.
TONES
The Tones Manager configures the alarm tone, event alert tone, new message tone and different
ringtones for the 3 SIP accounts. The Tones menu is accessible by selecting “MENU”->
“Personalize”-> “Tones”. (See Figure 148)