Gasboy WGT Outdoor Unit - Manual (Page 20)

WGT Manual 1-12
1 1 - - 6 6 . . T T R R O O U U B B L L E E S S H H O O O O T T I I N N G G
Table 1-8 lists the recommended procedures for troubleshooting the WGT.
Table 1-8. WGT, Troubleshooting Procedures
No. Symptom Troubleshooting Procedure Recommended Action
1 LEDs are inactive Check DC Voltage power supply
output Replace DC Voltage
power supply
Check AC and DC output Replace power supply
Check the proper connection between
the Power Supply and the WGT Wire the units anew.
2 No communication
between the Master WGT
and the FCC
Check CAT-5E cable connection
between the Master WGT and the
FCC Replace one unit, then
other units if necessary
3 No RF communication Check Nozzle Reader setup Replace Nozzle
Reader
Check WGT setup Set WGT anew
4 Wrong date and time in
log’s after electricity
failure. Check WGT battery Replace battery as
describe in
paragraph 1-4.6.