Gasboy Fuel Point-Swivel Limit Bracket - Manual

C35818 Rev. 7072
SWIVEL LIMIT BRACKET INSTALLATION INSTRUCTIONS
Swivel action must be limited for hoses and fittings modified for use with Fuel
Point to prevent disconnecting the connectors or breaking the hose wire.
This kit provides the parts required to limit the swivel action for hoses with built-in
swivels and other special swivel applications. One clamp is used to mount the
swivel limit bracket. The second clamp is located on the hose collar and the
screw mechanism provides the stopping action.
The kit is made to fit most applications by forming the aluminum bracket
(C35767) to the diameter required. The mini hose clamps may be modified to fit
smaller diameter applications using a sharp pair of 6” side-cutter pliers. The
diagram below shows a typical application.